Arbirtrary expressions after the "values" keywords must now be enclosed
within parentheses; consider the following example:
<code>
periods 1:2;
values -1 -2;
</code>
In the previous syntax, this was interpreted by the preprocessor as a shock of
value -1-2 = -3 for periods 1 and 2, which is clearly not the intent of the
user; with the new syntax, this will be rejected (too many values compared to
the number of ranges).
Also note that now commas are no longer required between arbitrary expressions,
since the parentheses are sufficient for separating them.
* give the possibility of calibrating measurement errors in the "shocks" blocks (only for observed endogenous variables)
* M_.H is now initialized in the preprocessor
* only one "varobs" statement is now accepted in a MOD file
* removed "options_.simul", and instead test if "options_.periods" is non-zero
* test for the incompatibility of options "periods" and "hp_filter" in "stoch_simul.m", instead of in the preprocessor
Reference manual:
* removed "simul" options, updated "periods"
* updated "order" option (for 3rd order)
* added "k_order_solver" option
* give some hints for installing a compiler for users of MATLAB for Windows
git-svn-id: https://www.dynare.org/svn/dynare/trunk@3188 ac1d8469-bf42-47a9-8791-bf33cf982152
* fixed a bug with EXPECTATION operator: now handle model local variables
* substitute EXPECTATION operator even in deterministic models (for avoiding crashes, even if use of this operator doesn't make sense there)
* forbid the use of EXPECTATION and STEADY_STEATE outside model block
* minor implementation changes in EXPECTATION and STEADY_STATE operators
reference manual:
* documented EXPECTATION and STEADY_STATE operators
* added a note in write_latex_{static,dynamic}_model commands documentation about auxiliary variables and other model transformations
git-svn-id: https://www.dynare.org/svn/dynare/trunk@3145 ac1d8469-bf42-47a9-8791-bf33cf982152
* Changed the conditional forecast section in the manual.
* Removed the calibration token from the preprocessor.
git-svn-id: https://www.dynare.org/svn/dynare/trunk@3067 ac1d8469-bf42-47a9-8791-bf33cf982152
* added interface in the MOD file, with a new option "aim_solver" to stoch_simul and estimation
* documented the option in the reference manual
git-svn-id: https://www.dynare.org/svn/dynare/trunk@3059 ac1d8469-bf42-47a9-8791-bf33cf982152
- corrects some mod files.
- In steady command, get check argument from bytecode dll
git-svn-id: https://www.dynare.org/svn/dynare/trunk@3051 ac1d8469-bf42-47a9-8791-bf33cf982152
* Reference manual: created a section on forecasting (with "forecast" option), and added the three new statements to that section
git-svn-id: https://www.dynare.org/svn/dynare/trunk@3049 ac1d8469-bf42-47a9-8791-bf33cf982152
* new options to "identification" statement: "ar", "useautocorr", "load_ident_files", "prior_mc"
* implement the call to dynare_identification() when "identification" statement is encountered
* new options to "dynare_sensitivity" statement: "ar", "useautocorr", "load_ident_files"
* trigger computation of model derivatives w.r. to parameters when "identification" option of "dynare_sensitivity" statement is used
git-svn-id: https://www.dynare.org/svn/dynare/trunk@3046 ac1d8469-bf42-47a9-8791-bf33cf982152
* Added solve_algo=5 for steady
* Remove obsolete method option of simul
* Added various checks to avoid unimplemented combinations of bytecode/block/solve_algo/stack_solve_algo
git-svn-id: https://www.dynare.org/svn/dynare/trunk@2882 ac1d8469-bf42-47a9-8791-bf33cf982152
- the options "sparse_dll" and "sparse" are no more available. They are replaced by combinations of block (for block decomposition) and bytecode (for model stored in a binary file)
- markowitz is now an option of simul and steady commands
git-svn-id: https://www.dynare.org/svn/dynare/trunk@2873 ac1d8469-bf42-47a9-8791-bf33cf982152
- mfs: new option for 'steady' and 'model' commands. Determines the equation belonging to the set of feedback variables.
mfs = 0 => all variables are considered as feedback variables (default value)
mfs = 1 => using only naturally normalized equation as potential recursive equations (all variables assigned to unnormalized equations are considered as feedback variable)
mfs = 2 => adding to the set of potential recursive equation with mfs = 1 the linear equation in endogenous variable normalized (all variables assigned to nonlinear unnormalized equations are considered as feedback variable)
mfs = 3 => adding to the set of potential recursive equation with mfs = 2 the non linear equation in endogenous variable normalized
- correction of few buggs in simulate.dll
- block_mfs_dll: new option for 'steady' command. Use simulate.dll to solve the steady state model (speedup the computation of the steady-state and the homotopy)
git-svn-id: https://www.dynare.org/svn/dynare/trunk@2866 ac1d8469-bf42-47a9-8791-bf33cf982152
* normalizes the static model
* computes its block decomposition, using topological order
* for each block, computes minimum feedback set of variables
* at this stage, only produces text output (no change in the computation of steady state)
git-svn-id: https://www.dynare.org/svn/dynare/trunk@2798 ac1d8469-bf42-47a9-8791-bf33cf982152
* added support for derivatives of Hessian w.r. to parameters
* added "identification" command which does nothing for the moment, except triggering those derivatives w.r. to params
git-svn-id: https://www.dynare.org/svn/dynare/trunk@2613 ac1d8469-bf42-47a9-8791-bf33cf982152
-> MatlabFile.cc and MatlabFile.hh are added to dynare in order to read the Mat-File
git-svn-id: https://www.dynare.org/svn/dynare/trunk@2349 ac1d8469-bf42-47a9-8791-bf33cf982152
* DynareBison.yy: use "filename" rule for initval_file, dynasave, dynatype and datafile option
* DynareBison.yy: removed some spurious syntaxes for dynatype and dynasave
* ComputingTasks.cc: bugfix for dynatype
* cosmetic changes to dynatype.m and dynasave.m
git-svn-id: https://www.dynare.org/svn/dynare/dynare_v4@2145 ac1d8469-bf42-47a9-8791-bf33cf982152
* added back model_comparison logic
* added QUOTED_STRING token in lexer
* added filename rule in parser (filename is NAME or QUOTED_STRING)
git-svn-id: https://www.dynare.org/svn/dynare/dynare_v4@2115 ac1d8469-bf42-47a9-8791-bf33cf982152
TODO:
+ Add an option to define the benchmark model (bayes ratio).
+ Add comparison to estimated BVAR models.
git-svn-id: https://www.dynare.org/svn/dynare/dynare_v4@2110 ac1d8469-bf42-47a9-8791-bf33cf982152
* DynareBison.yy: added missing declaration of MODEL_INFO as a token
* various cosmetic changes
git-svn-id: https://www.dynare.org/svn/dynare/dynare_v4@1995 ac1d8469-bf42-47a9-8791-bf33cf982152
- Check allowed with sparse option
- New command "MODEL_INFO" providing informations about the block structure of the model
- Memory leak corrections
git-svn-id: https://www.dynare.org/svn/dynare/dynare_v4@1993 ac1d8469-bf42-47a9-8791-bf33cf982152
* added preprocessor support for inverse gamma of type 2
* added support for this distribution in prior_bounds.m and rndprior.m
* other cosmetic changes
git-svn-id: https://www.dynare.org/svn/dynare/dynare_v4@1983 ac1d8469-bf42-47a9-8791-bf33cf982152
corrected threshold_redform option
threshold_redform option accepts float and (-)Inf
split value (puts NaN for no value) and value1 (doesn't accept no value)
git-svn-id: https://www.dynare.org/svn/dynare/dynare_v4@1803 ac1d8469-bf42-47a9-8791-bf33cf982152