9c75f6e913
Updated the preprocessor submodule.
2018-11-30 21:30:08 +01:00
efec664667
Preprocessor update + corresponding change in parameters derivatives
...
In the *_params_derivs.m files, in the "hp" matrix, the preprocessor now fully
outputs the symmetric elements, so getH needs to be adapted.
By the way, also clean up code for "rpp" and "gpp", were full symmetric
elements were also already present (and therefore do not need to be duplicated
in getH).
2018-11-22 17:53:39 +01:00
6995e24863
The testsuite can now be run from Windows
2018-11-21 16:21:59 +01:00
59d4dd185e
Merge branch 'ident_test' into 'master'
...
kim2.mod: trigger case where estim_params_block is not detected
See merge request Dynare/dynare!1638
2018-11-16 17:55:39 +00:00
a7a46a6b75
Add missing file in c407b63e84
...
Ref Dynare/preprocessor#13
2018-11-16 18:37:20 +01:00
c407b63e84
Update preprocessor submodule + add test
...
Ref Dynare/preprocessor#13
2018-11-16 18:34:37 +01:00
33d35d8fcc
kim2.mod: trigger case where estim_params_block is not detected
2018-11-16 17:56:13 +01:00
981e2e247a
Fix MATLAB version number in announcement
2018-11-16 17:51:11 +01:00
635aa65665
Merge branch 'ident_plot_bug' into 'master'
...
identification_analysis.m: Fix bug introduced in 60d95b65f2Dynare/dynare!1637
2018-11-16 16:21:14 +00:00
b615d2d795
identification_analysis.m: Fix bug introduced in 60d95b65f2
...
We already used a variable called offset
2018-11-16 16:20:27 +01:00
7cbd3ecbf7
Merge branch 'cmr_steady_issue_2' into 'master'
...
evaluate_steady_state_file.m: Remove redundant setting of auxiliary variables
Closes #1175
See merge request Dynare/dynare!1635
2018-11-16 14:28:23 +00:00
4ecbcbb136
evaluate_steady_state_file.m: Remove redundant setting of auxiliary variables
...
The original problems seems to have been fixed by #1133
Essentially reverts 3c7e60b744closes #1175
2018-11-16 14:12:55 +01:00
3b69635200
Merge branch 'cmr_steady_issue_1' into 'master'
...
evaluate_steady_state_file.m: fix two bugs in debugging mode
See merge request Dynare/dynare!1634
2018-11-16 11:36:25 +00:00
f947a31b80
evaluate_steady_state_file.m: fix two bugs in debugging mode
2018-11-16 09:24:43 +00:00
60d95b65f2
Identification strength: make plotting consistent
...
1. Rely on actually computed standard deviations in bayestopt_ instead of potentially unset estim_params_
2. Remove arbitrary normalizations/omitted normalization in case of division by 0 in normalization
3. Distinguish between 0 identification and division by 0 due to normalization in plots
(cherry picked from commit 7341e21a381850c47fbed018bf6a7acdda4fa92e)
2018-11-16 10:17:30 +01:00
3acdcd3657
Update preprocessor submodule
2018-11-15 18:00:20 +01:00
ad451ad224
Merge branch 'prior_dens_info' into 'master'
...
Deal with info returned by priordens being a vector
See merge request Dynare/dynare!1629
2018-11-15 09:39:11 +00:00
513f3ec68e
Merge branch 'evaluate_steady_state' into 'master'
...
evaluate_steady_state.m: consistently use params
Closes #1627
See merge request Dynare/dynare!1630
2018-11-15 09:22:09 +00:00
6e5465c0ff
Merge branch 'gsa_plot' into 'master'
...
Fixes to GSA plots
See merge request Dynare/dynare!1631
2018-11-15 09:12:29 +00:00
30361ccb49
GSA scatter plots: Correctly pass LaTeX-names to figure
2018-11-14 18:37:54 +01:00
022913579a
map_calibration.m: Fix bug that prevented display of restrictions
2018-11-14 18:37:05 +01:00
c16c2fb894
evaluate_steady_state.m: consistently use params
...
Prevents erroneously relying on stale parameters from M.params (thanks to Tom Holden); closes #1627
2018-11-14 16:01:55 +01:00
09a166f4e7
Revert "adding missing any()"
...
This reverts commit a5b97a28a0
2018-11-14 15:04:27 +01:00
c1b0bb5ee3
initial_estimation_checks.m: Turn vector info into scalar
...
Related to a5b97a28a0
2018-11-14 15:02:15 +01:00
7b0ef3d080
Merge branch 'doc_references' into 'master'
...
Cosmetic fixes to reference in manual
See merge request Dynare/dynare!1628
2018-11-14 11:33:49 +00:00
bb1642b5b8
Cosmetic fixes to reference in manual
2018-11-14 12:15:59 +01:00
18faa9733c
Further updates related to minimal MATLAB version bump
2018-11-13 18:29:20 +01:00
7a75872f72
Modernization: use tilde (~) syntax for ignored output arguments
2018-11-13 18:02:09 +01:00
ce49cd95df
Add missing iscolumn and ismatrix for MATLAB < R2010b
...
Also fix a bug in isrow (it was not checking the rank of the array).
2018-11-13 16:59:27 +01:00
736d43c4e6
Bump minimal MATLAB version requirement to 7.9 (R2009b)
2018-11-13 15:59:16 +01:00
abc8431698
Remove instructions about builing under Windows Subsystem for Linux
...
See the discussion in http://eris.dynare.org/pipermail/dev/2018-November/005062.html
2018-11-12 15:36:31 +01:00
c6f5c804d9
Gensylv MEX also needs MatIO (because Dynare++ code does)
2018-11-12 12:56:01 +01:00
2c65f92c6c
preprocessor: submodule update. closes #1210
2018-11-09 15:13:08 +01:00
91a455f2c7
Update preprocessor submodule
2018-11-08 18:12:20 +01:00
331a27398a
Fix another memory leak in k-order DLL
...
Re Dynare/dynare#1490 .
2018-11-08 17:30:48 +01:00
50a09a687e
C++11 modernization
...
Incidentally, fix a memory leak related to DynamicModelAC instantiation, using
a std::unique_ptr (see Dynare/dynare#1490 ).
2018-11-08 17:24:19 +01:00
7fd5f4bd6d
Fix for MATLAB location in README
2018-11-08 13:00:43 +01:00
9dfbb787b3
Further fix on slicot building under Windows
2018-11-08 12:56:17 +01:00
b4dd46e8ea
Misc fixes to README
2018-11-08 12:50:59 +01:00
2dcaff4f16
preprocessor: submodule update
2018-11-07 15:57:22 +01:00
afc9f94854
On Windows, statically link the pthread library
...
Otherwise the DLL is dynamically linked against libwinpthread. This regression
was introduced by commit 671fe4bcd
2018-11-07 14:38:04 +01:00
f630bc31be
Add information about package upgrade under MSYS2
2018-11-06 18:03:51 +01:00
b6f11063ca
Remove unfinished instructions for Fedora
2018-11-06 17:22:03 +01:00
b9da355b1a
Update build instructions for Debian/Ubuntu
2018-11-06 17:08:49 +01:00
abe8bee683
Bump required version for Bison
2018-11-06 17:08:49 +01:00
9a7ded24e8
Compilation instructions under Windows using MSYS2
2018-11-06 17:08:49 +01:00
e37549461b
doc: update mexext, matlabroot options
2018-11-06 16:41:35 +01:00
671fe4bcd4
Build system improvements on Windows (MinGW / MSYS2)
...
- Use the -static flag when linking Dynare++, so that shipping libquadmath and
libgcc DLL in the installer is no longer needed.
- Use AM_CXXFLAGS and AM_LDFLAGS variables for changing flags, since CXXFLAGS
and LDFLAGS are user variables. Also, this avoids passing these flags down to
configure scripts in subdirectories.
- Check for the SZIP library in the configure test for the MatIO, this is
needed under MSYS2.
- Statically link MatIO and GSL in MEX files for MATLAB, this is needed under
MSYS2.
2018-11-06 12:17:56 +01:00
47596aa3e0
Update preprocessor submodule
2018-11-05 12:32:02 +01:00
6684cbd9a6
Update preprocessor submodule
2018-11-05 11:30:05 +01:00
Stéphane Adjemia (Scylla)
Sébastien Villemot
Johannes Pfeifer
Houtan Bastani